Starting electrical independence

[Electricity]

Seeking cooperation on filing patents only US and UK. I will explain the reasons in a personal correspondence. Is it possible to copy the generator - yes - only by disassembling the working model to the screw? Nuances:

1. The gap between the magnetic circuit of the stator core is 0.5 mm. Winding 1.2 mm. In a conventional generator, you will not be able to pack such a winding.
2. The hysteresis is completely different than in a traditional generator.
3. 12 windings - 1-5 kW. 24 windings - 5-10 kW - rotation under load is 30-50% lighter. There are several times fewer magnets than in similar traditional generators.
4. In the event (even if it is unlikely) of the failure of 1 winding, the power drop occurs not by 33%, but by 4%.
5. Incorrect connection of the windings gives a result equal to zero.
6. Incorrect use of unnecessary metal gives a result equal to zero.
7. The generator is completed with the electronic block. Without the electronic unit, the result is zero.
8. Ignorance of the proportions of the ratio of magnetic fluxes - the result is zero.
9. Heat readings are much lower (visual - requires scrolling in the lab for accurate results)
10. Three assembly configurations are fundamentally different. All three configurations have three varieties.
Accordingly, copying is not so easy. The product is the result of forced efforts! I would not do this at all if my turbine did not need just such a generator! How a turbine works - an explanation is possible only with a joint demonstration of texts accompanied by drawings and my explanations - everything is solely based on traditional physics and phenomena recognized by modern science.

 

[Electricity]

That must be painfull....apply for patent, only to then be in a position that allows the information in that very patet to let competitors directly copy the idea.

If that were the case....what was the point of the patent?

Why would I wish to invest in your idea, if your patent were not able to stand up to being copied so easily?


I was ready.....ready to invest.....but not if it can be copied so easily.

Seeking cooperation on filing patents only US and UK. I will explain the reasons in a personal correspondence. Is it possible to copy the generator - yes - only by disassembling the working model to the screw? Nuances:

1. The gap between the magnetic circuit of the stator core is 0.5 mm. Winding 1.2 mm. In a conventional generator, you will not be able to pack such a winding.
2. The hysteresis is completely different than in a traditional generator.
3. 12 windings - 1-5 kW. 24 windings - 5-10 kW - rotation under load is 30-50% lighter. There are several times fewer magnets than in similar traditional generators.
4. In the event (even if it is unlikely) of the failure of 1 winding, the power drop occurs not by 33%, but by 4%.
5. Incorrect connection of the windings gives a result equal to zero.
6. Incorrect use of unnecessary metal gives a result equal to zero.
7. The generator is completed with the electronic block. Without the electronic unit, the result is zero.
8. Ignorance of the proportions of the ratio of magnetic fluxes - the result is zero.
9. Heat readings are much lower (visual - requires scrolling in the lab for accurate results)
10. Three assembly configurations are fundamentally different. All three configurations have three varieties.
Accordingly, copying is not so easy. The product is the result of forced efforts! I would not do this at all if my turbine did not need just such a generator! How a turbine works - an explanation is possible only with a joint demonstration of texts accompanied by drawings and my explanations - everything is solely based on traditional physics and phenomena recognized by modern science.

 

[Electricity]

Neither of those show sustainable generation. Neither video show the generator powering a household device. All they do is show something producing a voltage after being spun up by a cordless drill.

Of course, these are probes))) Real generators will be received by the person who is interested in cooperation - everything is simple)))

 

[Electricity]

In order to understand how a light rotation generator works under load, you need to remove two points from the traditional circuit:
1. Remove alternating magnets
2. Remove one magnet from the classic frame example.
If you doubt that such a solution is possible, I am ready to provide a working generator with just such a solution. (picture on my screensaver)

 

[fisicx]

Yes I know, but generating electricity is simple. Pretty much any rotating field will do this. Your video proves nothing.

In an earlier video you said it would use tidal or wind power. Buy a wind turbine and show it working. Show 240VAC powering a kettle.

All you have is words. Nothing an investor would be interested in.

I’m not suggesting your invention doesn’t work. It’s just that you haven’t demonstrated anything other than you can create a voltage from a rotating device. YouTube is full of examples of how to do this.

 

[John Hemming]

Neither of those show sustainable generation. Neither video show the generator powering a household device. All they do is show something producing a voltage after being spun up by a cordless drill.

I think in the second video the drill is corded. Whichever way all he is doing is mystifying me as to why anyone would think anyone would be interested in sending any money his way.

 

[Financial-Modeller]

The OP seems to have generated 5 watts of light using only a few hundred watts of electricity to power a drill.

Surely the real opportunity here is helping nocturnal DIY enthusiasts attempting to drill holes in the dark, by illuminating the material that they intend to drill into, simply using the OP's invention and a spare drill to power it. A Viz Top Tip?

 

[NickGrogan]

Please see two examples in the background picture and avatar.

No patents there.

I need patent numbers and countries. If you have them, then they are already published and available to the public, so your claims of privacy make no sense.

 

[Electricity]

The lights are on, but nobody’s home)​

 

[fisicx]

The lights are on, but nobody’s home)​

Only for a few seconds. Once the drill stops the light goes out.

 

[NickGrogan]

The lights are on, but nobody’s home)​

It's ok if you don't have the patents.

Just say so.

 

[John Hemming]

I need patent numbers and countries. If you have them, then they are already published and available to the public, so your claims of privacy make no sense.

It does not appear that he understands how patents work. I would assume he has never actually got a patent.

 

[NickGrogan]

It does not appear that he understands how patents work. I would assume he has never actually got a patent.

I'm not sure he understands how a lot of things works.

 

[Electricity]

It does not appear that he understands how patents work. I would assume he has never actually got a patent.

Do you need a number? - if you are such an expert on patent procedures - try to find without data and number. That's just received information on the latest application -

«Provisional protection for the invention between the publication of the application and the grant of the patent only enters into force in the contracting states of the European Patent Convention (EPC), if a translation of the published patent claims into the official language of the corresponding states has been prepared and filed there. Since the European patent application will be published in English, provisional protection is already effective in Great Britain and Ireland. In case you are interested in obtaining provisional protection in other countries, we kindly ask you to contact us so that we can provide you with more details. »

 

[NickGrogan]

I started to look, but got sidetracked by this far more exciting sounding patent.

SYSTEM AND METHOD FOR INDUCING SLEEP BY TRANSPLANTING MENTAL STATES​

Espacenet - Bibliographic data

worldwide.espacenet.com

You can have a sleep transplant.

 

[UKSBD]

US9825496B2 - DC electric motor/generator with enhanced permanent magnet flux densities - Google Patents

A new and improved method for producing electric energy or mechanical power, and in particular to an improved system and method for producing rotary motion from an electro-magnetic motor or generating electrical power from a rotary motion input by concentrating magnetic forces due to...

patents.google.com

 

[fisicx]

Do you need a number? - if you are such an expert on patent procedures - try to find without data and number. That's just received information on the latest application -

I'm not an expert so can you please post the country and patent number.

 

[Scubadog]

I started to look, but got sidetracked by this far more exciting sounding patent.

SYSTEM AND METHOD FOR INDUCING SLEEP BY TRANSPLANTING MENTAL STATES​

Espacenet - Bibliographic data

worldwide.espacenet.com

You can have a sleep transplant.

Does that have a patent number, or does it require a piece of string wound around a drum to make it briefly happen?

 

[NickGrogan]

Does that have a patent number, or does it require a piece of string wound around a drum to make it briefly happen?

I linked to it.

US2019321583 (A1) ― 2019-10-24​

Unfortunately no demo, just a flow chart.

 

[NickGrogan]

Wait, they have a video

Neurolight - Transplanting Brain States for Better Sleep

NeuroLight offers a groundbreaking approach to neuromodulation and brain entrainment to improve sleep and achieve optimal brain states.

neuroenhancementlab.com

 

[Electricity]

US9825496B2 - DC electric motor/generator with enhanced permanent magnet flux densities - Google Patents

A new and improved method for producing electric energy or mechanical power, and in particular to an improved system and method for producing rotary motion from an electro-magnetic motor or generating electrical power from a rotary motion input by concentrating magnetic forces due to...

patents.google.com

Thank you very much!

 

[Electricity]

I'm not an expert so can you please post the country and patent number.

Of course, if you are ready to become the author of real patents that will change the essence of electrical generation in principle)

 

[Electricity]

Thank you very much!

Great job! Now everyone can look at a patent and say if it has any sense, technical and commercial potential? There are all super-experts and super-specialists here - your opinion is very valuable!

 

[fisicx]

Great job! Now everyone can look at a patent and say if it has any sense, technical and commercial potential? There are all super-experts and super-specialists here - your opinion is very valuable!

Is that your patent? I only ask as it was granted in 2017 in the US and you said you needed help getting a patent in the US. Are you Fred Hunstable of Linear Labs?

 

[Electricity]

Is that your patent? I only ask as it was granted in 2017 in the US and you said you needed help getting a patent in the US. Are you Fred Hunstable of Linear Labs?

Of course it's not mine - but it doesn't matter. From this patent, its technical characteristics are clear. That's why I asked the experts... If someone has a real interest about a new way of generating electricity (or may be a party to a transaction involving a third interested party), then agreements are possible only in the legal plane. The conditions for the transfer of information are specified in the cooperation agreement. The pre-patent agreement is officially concluded with notarization. I don't know of any other option.

 

[fisicx]

Pre-patent agreement? Does this mean you haven’t been granted any patent?

There are hundreds of patents for all sort of electrical generation. Nobody is going to sift through them all hoping to find yours. Why are you so reluctant to post the details here?

I know two people who may be interested in working with you but they want to see the patent details before showing their hand. They also want to see working prototype - one that actually powers a device.

 

[Electricity]

Pre-patent agreement? Does this mean you haven’t been granted any patent?

There are hundreds of patents for all sort of electrical generation. Nobody is going to sift through them all hoping to find yours. Why are you so reluctant to post the details here?

I know two people who may be interested in working with you but they want to see the patent details before showing their hand. They also want to see working prototype - one that actually powers a device.

Pre-patent agreement? Does this mean you haven’t been granted any patent?

You know what the problem is - it's some kind of paranoia ... What does my past patents have to do with it? We are talking about new applications - I have already said - there will be two of them. It is very difficult to talk when the interlocutor is not really knowing with the procedure. A pre-patent agreement is concluded between the co-authors of a patent and only if there are 2 or more co-authors. This document neutralizes possible misunderstandings in the future and determines the participation of everyone in the contribution to intellectual property and the procedure for disposing of a future patent. What logic and where is the connection with reality in your phrase «Does this mean you haven’t been granted any patent? »? My part of the contribution is with me. If the person concerned determines the essence of his participation, only then is it possible to achieve mutually satisfactory agreements. So far, I don't know who I'm talking to.

 

[paulears]

He has a dream. He knows applying for and being granted a patent means scrutiny, he also wants to avoid scrutiny because it’s not sound enough. Patent application also mean no anonymity and we’d be able to see his other applications, we have been here before with the linear motor gravity idea. I wish I could find that long running topic, but I can’t.

 

[Electricity]

He has a dream. He knows applying for and being granted a patent means scrutiny, he also wants to avoid scrutiny because it’s not sound enough. Patent application also mean no anonymity and we’d be able to see his other applications, we have been here before with the linear motor gravity idea. I wish I could find that long running topic, but I can’t.

The procedure for passing a patent application is described on the website of any patent office. Expert evaluation has three stages. It is impossible to legally go through this procedure anonymously, or even file an application without having a preliminary patent search, which reflects the absence of such a development in the patent database. Thus, I am ready to respond to any constructive message, with the exception of absolutely useless ones. Good luck to all!

 

[Scubadog]

Thank you very much!

Looks like you have been beaten to it.

I will be seeking to place my investment with linear labs. They have a patent and are confident enough to share it.

I don't think you have one or are confident in your technology.

With that in mind...I am out

 

[Electricity]

Hundreds of mysterious strands found at the heart of the Milky Way | CNN

Nearly a thousand mysterious magnetic strands exist at the center of our Milky Way galaxy, according to a new telescope image. Scientists are trying to figure out the origins of these massive clusters.

edition.cnn.com

 

[Electricity]

A radio transient with unusually slow periodic emission - Nature

Analysis of archival low-frequency radio data from the Murchison Widefield Array reveals a periodic transient with an unusual periodicity of 18.18 min, the source of which is localized to our Galaxy and could be an ultra-long-period magnetar.

www.nature.com

 

[Electricity]

The European Charter says that energy must be accessible to all. In fact, energy policy is determined by a corrupt official (for example, the German chancellor works for Gazprom). 35 million Europeans this year choose between food and warmth. The only way to remove energy levers from politics is to make the generation source available to every consumer. War is money. Who pumped the crazy dictator with money?

 

[NickGrogan]

German chancellor works for Gazprom

Is that why Germany is blocking the approval of the NS2 pipeline that Gazprom are really keen to get approved? The Chancellor isn't doing his job very well.

Generating electricity is available to everybody, it's just hard work or requires resources like sun, wind or water.

How is your imaginary generator powered? I know you use an electric drill in your video, but I presume you have other options?

 

[Electricity]

Is that why Germany is blocking the approval of the NS2 pipeline that Gazprom are really keen to get approved? The Chancellor isn't doing his job very well.

Generating electricity is available to everybody, it's just hard work or requires resources like sun, wind or water.

How is your imaginary generator powered? I know you use an electric drill in your video, but I presume you have other options?

You yourself have already answered your own question. I said that wind and sun are not needed. You indicated the third option) Correct) More precisely, a water-based liquid. Do you know what living water based on special polymers is and why it has not yet been possible to achieve a long-term stable state? It's imaginary for you. Maybe the neutrino for someone is heresy. I tested my devices practically before talking about them.

 

[NickGrogan]

Do you know what living water based on special polymers is

According to Wikipedia "Living Water" is the Holy Spirit. I guess that's one way of getting energy.

I tested my devices practically before talking about them.

Cool, can we see a video of just one of your devices actually working?

 

[fisicx]

Maybe the neutrino for someone is heresy.

Who?

Neutrinos have been part of the standard model for decades.

 

[Electricity]

According to Wikipedia "Living Water" is the Holy Spirit. I guess that's one way of getting energy.



Cool, can we see a video of just one of your devices actually working?

Do you know the Viktor Schauberger turbine design? It has an error. If this error is corrected, the turbine has a similar essence, but a completely different look and principle of operation. The term living water is also used for a liquid that has quite interesting physical properties after the addition of special polymers to it. And who are You? I should be interested in showing you something? It is not my intention to show anything to an indefinite audience or to receive any finances from anyone. I had a completely different goal.

 

[Electricity]

Who?

Neutrinos have been part of the standard model for decades.

It is well known that the standard model does not answer all questions - therefore, all others, including string theory, remain only theories. And even if we believe that the boson in the collider was discovered, it is also known that its mass did not coincide with the theoretically predicted very much, so only more questions appeared ...

 

[fisicx]

It is not my intention to show anything to an indefinite audience or to receive any finances from anyone.

You haven't shown anyone anything. Unless you count someone spinning up a device using a drill to generate a voltage. I can do that with a bit of wire and a magnet.