Looking for Quality control inspectors in China....Recommendations please..

[sjdsalesuk]

Hi All,

I am looking for recommended quality control inspectors for China factories. Unlike the similar post below, not looking for 'sourcing' just inspectors to carry out the management of products in production and up until shipping. Any business that has been happy with the service provided by an inspecting agency or, even better, have been using one for a number of years and they have not let you down, please drop me a line!

Many thanks to you all and look forward to hearing any advice Any advice or possible trails would be welcomed...

 

[InspectionPartner]

Hi,

What sort of products are you importing from China?
I ask because medical products for example can be very tricky and its best to use an inspection company that is specialised in that field with years of experience.

 

[James Greg]

There are thousands of national and international quality control inspection companies are working in china because as you know china is trading in all over the world. I will be recommend you that you should select a local Chinese company. A local Chinese company will help you a lot instead of international company. They are well known their home products and don’t face any problem during their work. Good Luck

 

[sjdsalesuk]

Hi James, Thank you but yes i am aware there are many. Picking one out of the hat that comes with no recommendations is thwart with possible floors, hence why a company recommended that is being used regularly is what i am after. Thanks for your reply.

 

[sjdsalesuk]

We are looking at outdoor garden furniture this time, iron tables, chairs, all weather products, garden benches etc.....I know this 'should' be one of the more easier product lines to keep an eye on but we just had a container of rattan and a lot was badly produced and has cost us money ;-(

Whats your thoughts in that inspection partner?

with thanks

 

[PowerForwarding]

I can advise someone for you, send me a PM and i'll send you their details.

 

[sjdsalesuk]

Thank you very much

 

[Calibre Designs]

Unfortunately, we are not in a position to take anything more on as my team in Shanghai is just so booked up. If that changes then I'll let you know.

As far as inspection goes, make sure you have a plan and test methods in place. Sampling plans to ISO2859 will help with your sampling. Determine your critical, major and minor AQLs.

I've seen independent inspectors walk into factories...take a glance at the operation and gives it the OK.

Aber instruments found us on UKBF. Our inspectors stayed for the entire day and the report was over 20 pages long.

If you are investing thousands of your money especially if they are asking for it before they are shipped then it is worth the extra mile to do independent checks on the goods before they leave. Any factory in China who has a problem with that then it's probably not worth dealing with!

All the best.

 

[Deleted member 106864]

We have more than 10 years of furniture experience field. Please contact me for if you need our service.

 

[sjdsalesuk]

Thank you very much for your replies Calibre and atis i will be in touch. Thanks for info calibre and we did speak briefly on phone but we got cut off....cheers guys

 

[Calibre Designs]

Thank you very much for your replies Calibre and atis i will be in touch. Thanks for info calibre and we did speak briefly on phone but we got cut off....cheers guys

No worries. I jotted your number down and will call you tomorrow afternoon.

My phone was running on fumes when we last spoke.

Cheers

 

[Deleted member 106864]

Thank you very much for your replies Calibre and atis i will be in touch. Thanks for info calibre and we did speak briefly on phone but we got cut off....cheers guys

Sure , waiting for your reply soon. Just like to share some experience with you.

1. decide actory is very important. Good factory will give us good rate of qualified product.

2. Q.C team should start working while factory assembling. It will too late to Q.C products when goods already to ship.

3. You should make cheking list with Q.C team and let them know what your major care.

Wating for your contact soon.

 

[xiejunbing]

Maybe I can help you ,haha, You can contact me if you're interested
__________________
Professional Sellers based in GuangZhou City mainly Whioesale selling fashion clothing >>>>> dhgate.com/store/xd360

 

[CCBLed]

ah, better to get a local friend to support you. or set an office in local china if the business is big enough. be careful of suppliers especially at those so bad eva.

 

[sjdsalesuk]

Thanks for all your replies guys very helpful. Thanks again

 

[sjdsalesuk]

by the way i have made a good contact in china from this forum so that has really helped.

 

[shellrob]

Hi i am in china requally and know a number of inspectors that work freelance over many products - send me a PM and i can put you in touch with an English guy who might be able to help

 

[banfa]

Maybe i'me repeating other posts, but I'll give my 2 pence worth.

1. If you are doing repeat business in China it might be worth going out for a vist and spending some time with the boys at the factory, it can be a good experience and its always good to get 'friendly' with your business associates. Its an important part of Chinese custom

2. Secondly, if you know where your product is being produced, try and find a local sourcing agent who can help you look after QC, inspections whilst providing you with the correct service. inspection reports, merchandising reports, samples etc.

best of luck,

Richard
Director of Banfa international trading
Guangzhou, China

 

[banfa]

Maybe i'me repeating other posts, but I'll give my 2 pence worth.

1. If you are doing repeat business in China it might be worth going out for a vist and spending some time with the boys at the factory, it can be a good experience and its always good to get 'friendly' with your business associates. Its an important part of Chinese custom

2. Secondly, if you know where your product is being produced, try and find a local sourcing agent who can help you look after QC, inspections whilst providing you with the correct service. inspection reports, merchandising reports, samples etc.

best of luck,

Richard
Director of Banfa international sourcing
Guangzhou, China

 

[hemibag]

Hi, I worked as an inspector 3 years ago at a USA buying office in Shenzhen of China,
I know many inspectors, I can introduce one to you. pls contact me.

 

[Qing667]

We are looking at outdoor garden furniture this time, iron tables, chairs, all weather products, garden benches etc.....I know this 'should' be one of the more easier product lines to keep an eye on but we just had a container of rattan and a lot was badly produced and has cost us money ;-(

Whats your thoughts in that inspection partner?

with thanks

Hi,

Yes it is quite important to have QC partner in China if you do production here. Esp for products like furniture.

I personally also work in the outdoor garden furniture business and have factory in China.

But I also do the sourcing and trade biz .Maybe I can help you with it.

Qing

 

[fenger]

i know some agent , they have branch in both china and the uk, you can contact them, more reliable.

 

[IMEX Sourcing Services]

SJDsales: I guess this is a pretty old post now and you found us through a recommendation here. Its been great working with SJDSale so far and I hope we have lived up to the expectations. Looking forward to welcoming you in China.

 

[alan84]

Hi All,

I am looking for recommended quality control inspectors for China factories. Unlike the similar post below, not looking for 'sourcing' just inspectors to carry out the management of products in production and up until shipping. Any business that has been happy with the service provided by an inspecting agency or, even better, have been using one for a number of years and they have not let you down, please drop me a line!

Many thanks to you all and look forward to hearing any advice Any advice or possible trails would be welcomed...

Hi Scott, obviously you are aware of the risks involved in overseas production, which can range from quality issues, quantity discrepancies, trustworthiness of suppliers/factories and concerns about social compliance.

Please allow me have a brief introduction of our company here. Veriquality is an independent quality control company in China that focuses on quality control of consumer products and enjoys 10 plus years of experience in the industry. Our services include Product Inspections, Factory Audits and other customized quality improvement programs such as trainings, quality system consulting, etc.

If you have any needs for quality control in China, please let me know.

Good luck!

Alan Yang
Veriquality Inspection Service Limited
alan (at) veriquality.net
www(.)veriquality(.)net