D
Deleted member 88701
- Original Poster
- #1
A few weeks back now (probably too long to take action now but I'm curious anyway) I bought an Xbox 360 console on eBay sold with very little description other than it was faulty, 'for spares and repairs only'. Here's the link to the auction if you're interested: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180613726274
Anyway on arrival of the item it became apparent that an ape had attempted to repair the xbox, it's completely useless for anything. All of the plastic clips holding the casing together were broken due to the force and carelessness with which it was disassembled. Upon further inspection, someone had (incorrectly) attempted to use the common 'fix' of replacing the heatsink bolts, tightening them so much as to warp the circuit board. I'm not sure how but in the process they had even put a big dent in the fins of the heatsink. It's clear that whoever attempted this repair had the dexterity of a grizzly bear.
After this had failed, it appears that the prior owner decided to reflow the solder on the board using a hot air gun. This means a good majority of the capacitors and a few other components on the board had blown due to the heat involved. Basically due to the abuse it's of no use to anyone and certainly not for spares.
So in summary, should this prior attempt at repair have been mentioned in the auction? I know the seller never claimed it would work but they clearly knew they'd ruined it and were looking to offload.
Anyway on arrival of the item it became apparent that an ape had attempted to repair the xbox, it's completely useless for anything. All of the plastic clips holding the casing together were broken due to the force and carelessness with which it was disassembled. Upon further inspection, someone had (incorrectly) attempted to use the common 'fix' of replacing the heatsink bolts, tightening them so much as to warp the circuit board. I'm not sure how but in the process they had even put a big dent in the fins of the heatsink. It's clear that whoever attempted this repair had the dexterity of a grizzly bear.
After this had failed, it appears that the prior owner decided to reflow the solder on the board using a hot air gun. This means a good majority of the capacitors and a few other components on the board had blown due to the heat involved. Basically due to the abuse it's of no use to anyone and certainly not for spares.
So in summary, should this prior attempt at repair have been mentioned in the auction? I know the seller never claimed it would work but they clearly knew they'd ruined it and were looking to offload.
Last edited by a moderator: